DMP XR-100N, XR-150N, XR-500N, and XR-550N Intrusion Panel Integration


Overview

The DMP XR-100N, XR-150N, XR-500N, and XR-550N series intrusion panel integration enables local workstations to monitor and interact with DMP XR-100N, XR-150N, XR-500N, and XR-550N series intrusion panels. Intrusion panel integration licenses must be purchased separately for each intrusion panel being monitored within the system.

Prior to configuring the integration, the following are required:

  • Access It! Universal.NET min s/w v6
  • DMP XR-100N, XR-150N, XR-500N, or XR-550N

Access It! Universal.NET Licensing

The following licensing option must be enabled within the Access It! Universal dongle and is a system wide license. 

  • Intrusion Panels - 1/x

Panel Configuration

It is assumed that field technicians are familiar with the installation and servicing of the Remote Link configuration software for the DMP XR-100N, XR-150N, XR-500N, or XR-550N series intrusion panels. All question regarding the DMP Remote Link configuration software or the DMP XR-100N, XR-150N, XR-500N, and XR-550N series intrusion panels must be directed to DMP Technical Support.

Prior to integrating, the following must be applied to the DMP XR-100N, XR-150N, XR-500N, or XR-550N intrusion panel:

  • SDI Automation Address 80 enabled

Software Configuration

Adding A DMP XR-100N, XR-150N, XR-500N, or XR-550N Intrusion Detection Panel

  1. Navigate to the hardware tree by clicking on the hardware group within the Navigation pane
  2. Select Intrusion Panels item from the hardware tree
  3. Click New button on the toolbar
  4. Enter appropriate name for the panel
  5. Select Intrusion panel type of DMP XR-100N, XR-150N, XR-500N, XR-550N
  6. Enter appropriate Account number
  7. Enter appropriate Remote key
  8. Enter  appropriate Panel IP address
  9. Enter appropriate Panel port (TCP)
    Default port is 2001
  10. Enter appropriate Host port (UDP)
    Default port is 2001
  11. Enter appropriate GMT Offset
  12. Enter desired Connection check interval type
  13. Enter desired Connection check frequency
  14. Click Save button to save and close Intrusion Panel properties

Creating Intrusion Panel Areas

By creating intrusion panel areas, friendly names are assigned to pre-programmed area numbers within the panel.

  1. Navigate to the hardware tree by clicking on the hardware group within the Navigation pane
  2. Select Intrusion Panels item from the hardware tree
  3. Select appropriate intrusion panel to be modified
  4. Select Areas tab from lower pane
  5. Click New button on the Areas tab toolbar
  6. Enter appropriate name for the Area name
  7. Enter appropriate Area number
  8. Click Save button to save and close Intrusion Area properties

Creating Intrusion Panel Ouputs

By creating intrusion panel outputs, friendly names are assigned to pre-programmed area numbers within the panel.

  1. Navigate to the hardware tree by clicking on the hardware group within the Navigation pane
  2. Select Intrusion Panels item from the hardware tree
  3. Select appropriate intrusion panel to be modified
  4. Select Outputs tab from lower pane
  5. Click New button on the Outputs tab toolbar
  6. Enter appropriate name for the Output name
  7. Enter appropriate Output number
  8. Click Save button to save and close Intrusion Output properties

Creating Intrusion Panel User Codes

  1. Navigate to the hardware tree by clicking on the hardware group within the Navigation pane
  2. Select Intrusion Panels item from the hardware tree
  3. Select appropriate intrusion panel to be modified
  4. Select User Codes tab from lower pane
  5. Click New button on the User Codes tab toolbar
  6. Click the ... button from within the User name field
  7. Enter a Last Name or Card Number
  8. Click the magnifying glass icon to search
  9. Select appropriate user from result list
  10. Click OK button to populate User name with the selected user
  11. Enter appropriate User number
  12. Click Save button to save and close Intrusion User Code properties

Creating Intrusion Panel Points

By creating intrusion panel outputs, friendly names are assigned to pre-programmed area numbers within the panel.

  1. Navigate to the hardware tree by clicking on the hardware group within the Navigation pane
  2. Select Intrusion Panels item from the hardware tree
  3. Select appropriate intrusion panel to be modified
  4. Select Points tab from lower pane
  5. Click New button on the Points tab toolbar
  6. Enter appropriate name for the Point name
  7. Enter appropriate Point number
  8. Click Save button to save and close Intrusion Point properties

  • 671
  • 16-Jul-2019
  • 93 Views