Jan 05, 2022
Applies to
- Access It! Universal.NET version 5.5 and greater
The Casi M2000 is a single SIO with a connector for the M5-IC to plug directly into it and can support up to 4 readers. By default, each reader's strike, door contact, and request to exit are on the supervised reader itself. To use the on-board inputs and outputs of the M2000, the reader mappings must be updated.
Due to the first 8 inputs and 4 outputs being located on the supervised reader itself, Access It! Universal.NET will begin numbering the on-board inputs at 9 and outputs at 5. See table below for cross reference.
Access It! Universal.NET Input Number |
M2000 Physical Input Number |
9 | 1 |
10 | 2 |
11 | 3 |
12 | 4 |
13 | 5 |
14 | 6 |
15 | 7 |
16 | 8 |
17 | 9 |
18 | 10 |
Access It! Universal.NET Output Number |
M2000 Physical Relay Number |
5 | 1 |
6 | 2 |
7 | 3 |
8 | 4 |
9 | 5 |
10 | 6 |
11 | 7 |
12 | 8 |
Custom Mapping of Inputs/Outputs
For more information on mapping different inputs or inputs to a reader, see the article Custom Mapped Door Contact, REX, And Strike