Changing The IP Address Of A 2g Or SCP Using Telnet


Overview

This document outlines the steps required to update the IP address of the following controllers:

  • MINI-SCPE
  • SCP-E
  • 2gLE
  • 2gE

Steps

  1. Click Start | Run
    Run Window opens.
  2. Type CMD
  3. Click OK button
    DOS Window opens.
  4. Type Telenet XXX.XXX.XXX.XXX 9999
    X's represent the current IP Address of the SCP.
  5. Press Enter key
    Press Enter to go into Setup Mode message appears.
  6. Press Enter key
    Change Setup menu appears.
  7. Select change setup option number 0 Server configuration
  8. Press Enter key
    IP Address prompt appears for the first octet.
  9. Enter first octet of the new IP Address
    This is first octet of the new IP Address being assigned to the SCP.
  10. Press Enter key
    IP Address prompt appears for the second octet.
  11. Enter second octet of the new IP Address
    This is the second octet of the new IP Address being assigned to the SCP.
  12. Press Enter key
    IP Address prompt appears for the third octet.
  13. Enter third octet of the new IP Address
    This is the third octet of the new IP Address being assigned to the SCP.
  14. Press Enter key
    IP Address prompt appears for the fourth octet.
  15. Enter fourth octet of the new IP Address
    This is the fourth octet of the new IP Address being assigned to the SCP.
  16. Press Enter key
    Set Gateway IP Address <N> prompt appears.

  • 33
  • 10-Mar-2015
  • 5109 Views