Changing SCP/2gE Channel 1 Settings Using Telnet


Overview

This document outlines the steps required to update the Channel 1 settings of the following controllers:

  • MINI-SCPE
  • SCP-E
  • 2gLE
  • 2gE

Steps

  1. Click Start | Run
    Run Window opens.
  2. Type CMD
  3. Click OK button
    DOS Window opens.
  4. Type Telenet XXX.XXX.XXX.XXX 9999
    X's represent the current IP Address of the SCP.
  5. Press Enter key
    Press Enter to go into Setup Mode message appears.
  6. Press Enter key
    Change Setup menu appears.
  7. Select change setup option number 1 Channel 1 configuration
  8. Press Enter key
    Prompt appears for the Baudrate.
  9. Enter 38400 for the Baudrate
  10. Press Enter key
    Prompt appears for the I/F Mode.
  11. Enter 4C for the I/F Mode
  12. Press Enter key
    Prompt appears for the Flow.
  13. Enter 02 for the Flow
  14. Press Enter key
    Prompt appears for the Port No.
  15. Enter 3001 for the Port No
  16. Press Enter key
    A prompt appears for the ConnectMode.
  17. Enter C0 for the ConnectMode
  18. Press Enter key
  19. Enter N for the Auto increment source port
  20. Press Enter key
  21. Enter 000 for the first octet of the Remote IP Address
  22. Press Enter key
  23. Enter 000 for the second octet of the Remote IP Address
  24. Press Enter key
  25. Enter 000 for the third octet of the Remote IP Address
  26. Press Enter key
  27. Enter 000 for the first octet of the Remote IP Address
  28. Press Enter key
  29. Enter 0 for the Remote Port
  30. Press Enter key
  31. Enter 00 for the DisConnMode
  32. Press Enter key
  33. Enter 00 for the FlushMode
  34. Press Enter key
  35. Enter 00 for the first part of the DisConnTime
  36. Press Enter key
  37. Enter 00 for the second part of the DisConnTime
  38. Press Enter key
  39. Enter 00 for the SendChar 1
  40. Press Enter key
  41. Enter 00 for the SendChar 2
  42. Press Enter Key
  43. Select 9 for Save and Exit
  44. Press Enter Key

  • 289
  • 06-May-2014
  • 3313 Views