Configuring a Holiday for Labor Day

Overview

This article describes the steps needed to configure a Labor Day holiday and configure a door's unlock schedule to remain inactive for this day.

Access It! Universal.NET

  1. Navigate to the Holidays section (Go | Configuration | Holidays)
  2. Select New from the toolbar
  3. Name the Holiday - Labor Day 
  4. Set the Holiday Date to 09/03/2018
  5. Set the Holiday Duration to 1 day
  6. Check a single Holiday Group
    Make note of which Holiday Group has been checked.
  7. Click Save
  8. Navigate to the Intervals section (Go | Configuration | Intervals)
  9. Edit the Interval(s) responsible for the door's unlock schedule
  10. If this Interval is to remain inactive on Labor Day (Door remains locked) ensure the Holiday Group checkbox selected in step 6 is NOT checked. If this Interval is to remain active on Labor Day (door unlocks on schedule) ensure the Holiday Group checkbox select in step 6 IS checked.
  11. Navigate to the Timezones section (Go | Configuration | Timezones)
  12. Select the Timezone responsible for the door's unlock schedule
  13. The calendar display in the bottom pane represents the selected Timezones schedule. If the calendar is switched to the week of 09/03/2018, the timezone will display Red if it is to be inactive (Door Locked) or green if it is to be active (Door Unlocked).

Access It! Lite.NET

  1. Navigate to the Holidays section (Data Files | Holidays)
  2. Select New from the toolbar
  3. Name the Holiday Labor Day 2018
  4. Set the Holiday Date to 09/03/2018
  5. Click OK
  6. Navigate to the Timezones section (Data Files| Timezones)
  7. Edit the Timezone responsible for the door's unlock schedule
  8. If this Timezone is to remain inactive on Labor Day (Door remains locked) ensure the H check box is NOT checked. If this Timezone is to remain active on Labor Day (door unlocks on schedule) ensure the H check box IS checked.
  9. Click OK

Access It! NExT STEP

  1. Navigate to the Holidays section (Data Files | Holidays)
  2. Select New Holiday from the toolbar
  3. Name the Holiday Labor Day 2018
  4. Set the Holiday Date to 09/03/2018
  5. Click Save And Close
  6. Navigate to the Timezones section (Data Files| Timezones)
  7. Edit the Timezone responsible for the door's unlock schedule
  8. If this Timezone is to remain inactive on Labor Day (Door remains locked) ensure the H check box is NOT checked. If this Timezone is to remain active on Labor Day (door unlocks on schedule) ensure the H check box IS checked.
  9. Click Save And Close
  • 261
  • 05-Jul-2018
  • 5478 Views