Overview

With Access It! Universal V4, there is now the ability to select which inputs/outputs will be used as the reader's Door Contact/REX/Strike. This functionality applies to the M5 hardware which has no inputs/outputs on certain reader boards, as well as all traditional Mercury hardware.

Implementation

1. Navigate to the Hardware tree (Main | Hardware)
2. Select Installed Readers
3. In the right hand pane, edit the reader requiring a custom mapped Door Contact/REX/Strike
4. Select the Door Settings tab
5. To map a custom Door Contact, select the SIO containing the custom Door Contact from the SIO pick list
6. Select the appropriate input number in the Input # pick list
7. To map a custom Request to Exit (REX), select the SIO containing the custom REX from the SIO pick list
8. Select the appropriate input number in the Input # pick list
9. To map a custom Door Strike, select the SIO containing the custom Door Strike from the SIO pick list
10. Select the appropriate output number in the Input # pick list
11. Click Save