You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
Office Extended Feature
print icon

Overview

The Office Extended Feature allows for the ability to toggle a reader between unlocked and the readers default mode upon a double swipe of a valid card or toggle the reader mode when a custom defined input changes state. The Request to Exit (REX) will allow for free egress. The same valid card must be presented twice within 5 seconds for the reader mode to change. This feature will not work if the door is already in an Unlocked state.

The Office functionality operates during the Always Timezone and does not respect Card Groups. If this feature is needed to operate during a limited schedule, or respect Card Groups, separate Tasks should be created.

Implementation

Mercury Readers

EP Firmware 1.18X firmware required.

  1. Within Access It! Universal V4.x, navigate to the Hardware Tree (Go | Main | Hardware)
  2. Select Installed Readers
  3. Edit the Reader that will be using the Office Extended Feature
  4. Select the Reader Settings tab
  5. Select (Check) the option Enable Double-Card Event 
  6. Select the Extended Feature tab
  7. Select the Extended Feature Type Office
  8. Select the SIO the interior push button is attached to
  9. Select the input number the interior button is attached to
  10. Click Save

Allegion AD 300/400 Readers

  1. Within Access It! Universal V4.x, navigate to the Hardware Tree (Go | Main | Hardware)
  2. Select Installed Readers
  3. Edit the Reader that will be using the Office Extended Feature
  4. Select the Reader Settings tab
  5. Select (Check) the option Enable Double-Card Event 
  6. Select the Extended Feature tab
  7. Select the Extended Feature Type Office - Schlage 
  8. Click Save

Feedback
0 out of 3 found this helpful

scroll to top icon