Overview

The following article outlines the steps required to use 128 PIV-I cards with Access It!.

Requirements
Enrollment Reader

• Access It! Universal min s/w v4
• EP/LP controller with no card formats defined
• PIV-I reader

System Use

• Access It! Universal min s/w v4
• EP/LP controller with 128 Bit card format defined
• PIV-I reader
• PIV-I credentials

Implementation

1. Navigate to System | Sites
2. Edit the Site using 128 Bit PIV-I cards
3. Select Card Options
4. Check Use Large Card Numbers
5. Check Use Large Encoded Card ID
6. Click Save
   All SCPs on the site will go through a reset and cards will temporarily stop working.
7. Log off of Access It! Universal
8. Log into Access It! Universal

Enrollment Reader

1. Navigate to Main | Hardware
2. Select installed Readers
3. Edit the Enrollment reader
4. Set Access Configuration to Enrollment
5. Click Save
6. Navigate to System | Workstations
7. Edit the Enrollment Workstation
8. Select the Enrollment Readers tab
9. Check the PIV-I enrollment reader
10. Select how the system should respond When a new card is presented at an enrollment reader
11. Select how the system should respond When an existing card is presented at an enrollment reader
12. Select How the enrollment will create the fictional card number
    • Manual Card Number Entry
      • A user will need to manually enter a fictional card number and assign facility code -1 to each card enrolled
    • Automatic Card Number Entry
      • The enrollment will automatically assign a card number starting off of the Starting Card Number and will increment each time a new PIV-I card is added. Facility code -1 is assigned
13. Click Save

System Use

1. Navigate to Main | Hardware
2. Select SCPs
3. Edit the EP controller
4. Select the Card Formats tab
5. Select Edit Card Formats
6. Click New
7. Name the card format 128 Bit PIV-I
8. Set the card format as outline in the 128 Bit Wiegand PIV-I Card Format article
9. Click OK
10. Assign the 128 Bit PIV-I card format
11. Assign a facility code of -1
12. Select (Click) the Override Card Format Download (Advanced)
13. Click Save
    The SCP will reset and cards will temporarily stop working.